Young Living makes its essential oils in three main ways: steam distillation, cold pressing, and resin tapping. More than 80 percent of its oils are steam distilled. Citrus oils are cold pressed from the fruit, and oils like frankincense and myrrh start as resin tapped from trees. Here’s how each process works, and why the method matters as much as the plant.

What is an essential oil?

An essential oil is an aromatic, concentrated extract taken from a plant. It’s the part of the plant that carries its scent, which is why Young Living calls essential oils the essence of the plant.

That oil can live in different parts of different plants. It may be in the flowers, leaves, wood, roots, or seeds. In citrus fruit, it’s stored in the peel. Where the oil sits, and how delicate it is, decides which extraction method works best.

You’ll often hear “extraction” and “distillation” used interchangeably, but they aren’t quite the same. Extraction is the general process of separating oil from plant material. Distillation is one method of extraction, and it’s the one Young Living uses most.

Steam distillation

Steam distillation is the most common way to make essential oils, and it’s how Young Living produces more than 80 percent of its oils. Here’s how it works:

  1. Freshly harvested plant material is placed in a distiller, suspended over boiling water.
  2. Steam rises through the plants and pulls the oil out with it.
  3. The steam, now carrying the oil, travels into a condenser.
  4. As it cools, the steam turns back into water.
  5. Because oil and water don’t mix, the two separate, and the oil is collected.

The water left behind can become a hydrosol, a gently scented product that holds some of the plant’s water-soluble aromatic compounds.

Why gentle distillation matters

Essential oils are made up of many small aromatic compounds called constituents, and too much heat or pressure can destroy them. Young Living uses a gentle steam distillation process that applies just the right amount of heat and pressure for each plant, so the finished oil keeps its proper balance of constituents.

The Essential Oils Desk Reference explains why the details matter. The size and material of the distilling chamber, the type of condenser and separator, and the temperature and pressure all affect the quality of the oil that comes out.

Cold pressing

Citrus oils like Lemon, Orange, and Bergamot are made by cold pressing rather than distillation. Citrus fruit stores its oil in the peel, and the heat of distillation can break down those delicate molecules. Steam-distilled citrus oils can even take on a bitter aroma. Cold pressing keeps them bright and fresh.

Here’s how Young Living describes the process:

  1. The fruit is washed thoroughly.
  2. It’s agitated with spikes, grating, or similar methods to bring the oil to the surface of the peel.
  3. Water is sprayed over the fruit and mixes with the released oil.
  4. The oil is collected and separated from the water.

The Essential Oils Desk Reference adds one more point. Pressed oils should come from cleanly grown fruit, since anything sprayed on the peel can end up concentrated in the oil.

Resin tapping

Some of the most treasured oils start as resin, a sap-like substance trees produce to protect themselves from damage. To collect it, the bark is carefully tapped so the resin can flow out, in a sustainable process that keeps the tree alive and thriving. The resin is then dried and distilled.

Frankincense, Myrrh, Copaiba, and Elemi all come from this process. Since 2010, Young Living has worked with local harvesters in Salalah, Oman, to source the resin for its Sacred Frankincense oil.

How much plant goes into one bottle

Essential oils are highly concentrated, so every bottle takes a surprising amount of plant material. Here are Young Living’s own figures:

Oil Method Plant material Bottle
Peppermint Steam distilled More than 1 pound of peppermint 15 ml
Lemon Cold pressed The oil of more than 75 lemons 15 ml
Rose Steam distilled About 22 pounds of rose petals 5 ml

That concentration is also why a few drops go a long way. A single 5 ml bottle can hold as many as 80 drops.

From farm to bottle

Young Living’s Seed to Seal quality commitment covers every step, from the seed in the ground to the seal on the bottle. Its oils come from Young Living’s own corporate farms, partner farms, and hand-selected suppliers. By the time you open a fresh bottle, it has been tested almost 100 times.

A few of the places where that work happens:

  • Lavender Farm and Distillery, Mona, Utah. No water is wasted in the steam distillation process here, and the reduced water use saves roughly 260 million gallons a year.
  • Highland Flats Tree Farm, Naples, Idaho. Home to the first fully automated essential oil distillery. Conifers like Idaho Balsam Fir and Idaho Blue Spruce are distilled here, and computers monitor temperature and pressure so operators can adjust quickly. According to the Essential Oils Desk Reference, the improved process captures up to 80 percent more of the fine molecules lost in normal distilling.
  • Simiane-la-Rotonde, Provence, France. Lavender, rosemary, and clary sage grown in one of the world’s best-known lavender regions.
  • Northern Lights Farm, Fort Nelson, British Columbia. Built in 2014 to meet growing demand for Black Spruce oil.

Sources